View Single Post
Old 08-24-2005, 02:03 PM   #22
abracadabra
Obliviot
 
Join Date: Aug 2005
Posts: 39
Default

Well after much experimenting i can say my cpu is stable at 265*10 @1.5 v (have zalman heatsink should be fine) my ram though is having great trouble doing any timings at this speed with voltages up to 3v2 though (still only that 1 error at 191.1mb ,perhaps there is another timing that could fix this? I have droped most of them (didnt fix) then droped all of them and couldnt boot up(had to restet cmos). RAM seems fine at 2.5-3-3-8-8-10 at ddr500. Ive looked into memory dividers and have decided not to use them. What do you think about this? perhaps i should run at 2.65ghz and use a memory divider to run 2-2-2-5 on the ram. After a half dozen articles ive read it seems its best to run 1:1 rather than divider with nothing less than 2-5-3-3-8. What are your views on this rob? My target for now is trying to get the ram to work at ddr530 with 2.5-3-3-8-8-10 or similar.
__________________
AMD winchester 3200 @2.55ghz 1V325+110%
Crucial Ballistix pc3200 @2.5-2-2-5 1T 3V0 ddr510
DFI LanParty Ultra-D
X850XT PE
250GB Diamondmax 10
abracadabra is offline   Reply With Quote